BASICCOLOR DISPLAY SOFTWARE MANUAL
BASICCOLOR DISPLAY SOFTWARE SOFTWARE

(6 color adjustment settings cannot be saved to the profile.įor confirmation of calibration results or to achieve more accurate manual adjustments, a test pattern screen can be displayed. You can decide which of the adjustments will be saved to the profile. ColorNavigator lets you easily adjust hue and saturation for all six primary and secondary colors (red, green, blue, cyan, magenta, yellow), as well as white balance, brightness, black level and gamma, to achieve the closest possible visual match. Sometimes due to variations in output from different printers or the special requirements of a project, it is necessary to fine-tune an otherwise perfectly calibrated monitor to match target colors. Prioritize Contrast: Maintains a high contrast ratio.Standard: This is the default setting and it adjusts gray balance while maintaining the contrast ratio in the darker tones.Prioritize Gray Balance: Adjusts the gray chromaticity of the mid tones so they are the same as the white point.Three adjustment settings are available depending on what you want to prioritize when you are calibrating.

Prioritize Gray Balance or Contrast, or Both of Them Equally (This feature is not available for ColorEdge monitors with a built-in calibration sensor.) By measuring the white of the paper to be used for printing, ColorNavigator will automatically set the target values for brightness and white point accordingly.

Settable ranges vary depending on the monitor or sensor.Ī paper white measurement function offers better color matching between the image on the monitor and the image on the printouts.

Setting to the monitor's minimum value is also possible.ġ.0 – 2.6 in 0.1 increments and L*, LUT file Setting to the monitor's minimum and maximum values is also possible.Ġ.2 cd/m 2 – 3.5 cd/m 2 (0.1 cd/m 2 increments) This takes the guesswork out of assigning values for users with limited color management knowledge.īrightness: 100 cd/m 2, White Point: 5,500 K, Gamma: 2.2īrightness: 80 cd/m 2, White Point: 5,000 K, Gamma: 2.2īrightness: 80 cd/m 2, White Point: 6,500 K, Gamma: 2.2Įxperienced users can assign the desired values for brightness, white point, and gamma and then calibrate.ģ0 cd/m 2 – 200 cd/m 2 in 5 cd/m 2increments. Just select one, click 'Adjust', and ColorNavigator will begin calibrating. Preset values* for web contents, photography, and printing are available. Calibrate to Preset or User-Assigned Values ColorNavigator works with a wide range of measurement devices to directly utilize the Look-Up Table of ColorEdge monitors for accurate and reliable calibration in minutes.

BASICCOLOR DISPLAY SOFTWARE SOFTWARE

The EIZO-developed ColorNavigator software makes calibration simple and produces predictable color results.

Basiccolor display software